mastercam9.1佳铁发格加工中心CNC后处理PST文件下载

技术小编 0

mastercam9.1佳铁发格后处理PST文件下载


# Post Name           : JTGK_FAGOR_3AXIS_V3.0

# Product             : JTGK

# Machine Name        : JT

# Control Name        : FAGOR

# Description         : FAGOR MILL POST

# Created by          : Aven(tel:13356568879)

# Updated by          : Aven(tel:13356568879)

# Updated             : Dec. 2,2003

# Associated Post     : NONE

# Mill/Turn           : NO

# 4-axis/Axis subs.   : NO

# 5-axis              : NO

# Subprograms         : YES

# Executable          : MP v9.0

#

# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO

# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.

#

# --------------------------------------------------------------------------

# Revision log:

# --------------------------------------------------------------------------

# Programmers Note:

# CNC 01/12/01  -  Initial post update for V8.1, grt

# CNC 07/02/01  -  Add cantext to cancel drill and tool retract, jph

# CNC 01/09/02  -  Initial post update for V9.0, rjm 

# CNC 01/31/02  -  Set usecandrill, usecanpeck, force_wcs to YES, rjm

# CNC 02/22/02  -  Forces output of I,J,K arc centers (arcoutput:0), rjm

# CNC 04/12/02  -  Use original position for inverse feed and 4 ax paths, jph

# CNC 05/01/02  -  Set "helix_arc:2", support helix arc output in XY plane, rjm

# CNC 05/07/02  -  Do not update sav_rev with axis substitution, jph

#

# Post Name           : JTGK_FAGOR_3AXIS_V3.0

# Product             : JTGK

# Machine Name        : JT

# Control Name        : FAGOR

# Description         : FAGOR MILL POST

# Created by          : Aven(tel:13356568879)

# Updated by          : Aven(tel:13356568879)

# Updated             : Dec. 2,2003

# Associated Post     : NONE

# Mill/Turn           : NO

# 4-axis/Axis subs.   : NO

# 5-axis              : NO

# Subprograms         : YES

# Executable          : MP v9.0

#

# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO

# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.

#

# --------------------------------------------------------------------------

# Revision log:

# --------------------------------------------------------------------------

# Programmers Note:

# CNC 01/12/01  -  Initial post update for V8.1, grt

# CNC 07/02/01  -  Add cantext to cancel drill and tool retract, jph

# CNC 01/09/02  -  Initial post update for V9.0, rjm 

# CNC 01/31/02  -  Set usecandrill, usecanpeck, force_wcs to YES, rjm

# CNC 02/22/02  -  Forces output of I,J,K arc centers (arcoutput:0), rjm

# CNC 04/12/02  -  Use original position for inverse feed and 4 ax paths, jph

# CNC 05/01/02  -  Set "helix_arc:2", support helix arc output in XY plane, rjm

# CNC 05/07/02  -  Do not update sav_rev with axis substitution, jph

#

# --------------------------------------------------------------------------




mastercam9.1佳铁发格加工中心CNC后处理PST文件下载 mastercam 第1张


以下下载衔接付款后自动显示


如果

1不会操作

2需要优盘发送(补邮费和优盘费用)


可以点击下面联系客服人工发送

售后咨询发货等问题联系


mastercam9.1佳铁发格加工中心CNC后处理PST文件下载 mastercam 第2张


详情>点击这里




数控圈
0

标签: mastercam9.1后处理下载

如果本文对你有帮助,欢迎点击下面赞赏我们

发表评论 (已有0条评论)

还木有评论哦,快来抢沙发吧~